With the diversification of modern architectural design, curved facades, 90° corner structures, recessed and protruding curtain walls, and buildings with dense bay windows are becoming increasingly common. Traditional straight-section standard suspended platforms are only suitable for flat exterior walls, resulting in poor fit, inability to properly position corners, and numerous blind spots in construction. This leads to problems such as missed coatings, missed inspections, and uneven stress, affecting not only the quality of exterior wall insulation, coatings, and curtain wall construction but also increasing safety hazards for high-altitude operations. Addressing this industry pain point, Shenxi Group, leveraging over thirty years of experience in high-altitude equipment R&D, has launched a full range of custom-designed suspended platforms in curved, L-shaped, and U-shaped configurations. With modular structures and non-standard customization capabilities, these platforms completely solve the challenges of complex facade construction.
Conventional standard suspended platforms use a linear, fixed platform structure. When facing building corners, curved surfaces, or concave areas, the platform cannot conform to the wall contour, requiring workers to lean out and work sideways, limiting the working range and posing high safety risks. For narrow bay windows and multi-layered, uneven facades, standard platforms are prone to scraping and getting stuck, making it impossible to reach corners and often requiring additional scaffolding for backup, significantly increasing construction time and labor costs. In contrast, Shenxi’s custom-designed irregular suspended platforms are specifically designed for complex working conditions. Their structural form matches the building’s shape, eliminating blind spots at the source and eliminating the need for additional scaffolding, greatly simplifying on-site procedures.
Shenxi possesses mature, full-dimensional non-standard customization capabilities, and can precisely create three mainstream irregular-shaped platforms based on architectural drawings and on-site conditions. The L-shaped corner suspended platform is designed specifically for the 90° outer and inner corners of buildings. The two platform sections are rigidly spliced to fit the right-angle facade, making it suitable for building corner insulation and curtain wall finishing construction. The curved suspended platform is precisely bent according to the curvature of the building, perfectly fitting the curved curtain wall and the streamlined outline of landmark buildings. It allows for seamless operation around the entire circle, ensuring uniform coating thickness and no omissions in curtain wall inspection. The U-shaped notch suspended platform has a reserved middle clearance space, which is suitable for protruding structures on the facade, bay window groups, and areas obstructed by columns, allowing for construction in hidden locations without obstacles.
All irregular-shaped suspended platforms adopt a universal modular splicing design, compatible with the complete set of power and safety accessories of Shenxi standard suspended platforms. The platform is composed of standard sections and custom-shaped sections, and the length, angle and opening size can be adjusted as needed. It is available in steel and aluminum alloy materials, balancing strength and lightweight requirements. The equipment uses the same hoist, centrifugal/swing arm dual safety locks, wire rope and electrical control system. The safety protection standards are completely consistent with the national standard ZLP series, with multiple protections including tilt locking, rope breakage prevention, limit power cut-off, and leakage protection. The whole machine has strong compliance, and the inspection process is the same as that of standard suspended platforms, without the need for additional special reporting.
This product series is widely applicable to high-end commercial complexes, urban curved landmarks, irregularly shaped curtain wall residences, and older residential communities with dense bay windows, covering the entire process of exterior wall paint renovation, insulation installation, glass curtain wall inspection, sealant replacement, and facade cleaning. Compared to traditional construction methods, irregularly shaped suspended platforms do not require large-scale scaffolding, are easy to assemble, disassemble, and transport, have modular design for reuse, and their customized structures can be repeatedly used for similar irregularly shaped projects, resulting in outstanding long-term cost-effectiveness.
Shenxi provides a one-stop solution, from preliminary site surveys, structural modeling, and customized solutions to factory testing, on-site installation guidance, and personnel training. As a leading manufacturer participating in the drafting of national standards, all irregularly shaped suspended platforms are manufactured strictly in accordance with the GB/T 19155 national standard, and come with a complete set of type reports and qualification documents, ensuring safety, stability, and worry-free acceptance. For high-altitude construction on complex irregularly shaped buildings, choosing Shenxi’s customized irregularly shaped suspended platforms completely eliminates construction blind spots, achieving full coverage, high quality, and compliant high-altitude operations.
